The
Tip System (10º, 15º, 25º, 45º) with
its 108db piezo siren, will deter shaking and
rocking for many types of coin operated
equipment.
(specify tilt degree when ordering) Only $28
Tip Module (10º, 15º, 25º, or 45º)
• 9V Battery Holder
• 108dB Mini Piezo Siren
• Warning Label and Instructions
Tip Alarm Systems will
activate an audible siren whenever the protected
equipment is tilted, in any direction, beyond
the degree indicated on the control module (10,
15, 25, or 45 degrees). The siren will stop when
the equipment is returned to a level position.
The dimensions of the Tip Alarm modules are
1.75" x 2"; 4.5cm x 5cm.
Typical installations include bulk vending
machines, crane machines, and some vending
machines.
The
Super Tip System (10º, 15º, 25º, 45º),
with its 128db horn siren, will deter shaking
and rocking for many types of coin operated
equipment.
(specify tilt degree when ordering)
Only $42
Tip Module (10º, 15º, 25º, or 45º)
• 12V Battery Pack
• 128dB Horn Siren
• Warning Label and Instructions
Super Tip Alarm Systems
will activate an audible siren whenever the
protected equipment is tilted, in any direction,
beyond the degree indicated on the control
module (10, 15, 25, or 45 degrees). The siren
will stop when the equipment is returned to a
level position. The dimensions of the Tip Alarm
modules are 1.75" x 2"; 4.5cm x 5cm.
Typical installations include snack and can
vending machines, crane machines, and coin
amusement / video games.
The
Vending Security System features an
adjustable impact/abuse sensor and door reset.
Only $70
• 1020 Controller
• 12 Volt Battery Pack, & Harness
• 128 db Horn Siren
• Magnetic Contact Door Switch
• Warning Label and Instructions
The Vending Security
System features an adjustable variable
impact/abuse sensor, automatically resets (after
30 seconds), door trigger input, wide voltage
range (5 to 15 VDC), low current drain (.01 UA @
12VDC), and an optional relay output. The
dimensions of the 1020 controller are only
1.85" x 2.25".
Additional
Tip Function
A tip function may be added to the impact/abuse
and door protection of this security system by
incorporating a Tip Module as
an accessory.
The
LX Vending Security System includes all
the 3D system features, plus a key
lock switch to arm and disarm the system for
additional door protection
Only $76
• 1020 Controller
• 12 Volt Battery Pack
& Harness
• 128 db Horn Siren
• Magnetic Contact Door Switch
• Lock & Key for Arming and Disarming
• Warning Label and Instructions
.
The LX Vending Security
System features an adjustable impact/abuse
sensor, automatically resets (after 30 seconds),
door trigger input, lock and key for arming and
disarming, wide voltage range (5 to 15 VDC), low
current drain (.01 UA @ 12VDC), and an optional
relay output. The dimensions of the 1020
controller are only 1.85" x 2.25".
Additional
Tip Function
A tip function may be added to the impact/abuse
and door protection of this security system by
incorporating a Tip Module as
an accessory.
The
MAXIMUM Vending Security System includes
all the LX system features, plus
additional door protection using an entrance
delay (5 seconds) which eliminates the need for
a key-lock switch.
Only $80
• 1050 Controller
• 12 Volt Battery Pack & Harness
• 128 db Horn Siren
• Magnetic Contact Door Switch
• Reset Switch to Disarm the System
• Warning Label and Instructions
The Maximum Controller
1050 has all the unique features of the 1020
controller, plus an entrance delay
(5 seconds) which eliminates the need for a
key-lock switch to arm and disarm the security
system, and an automatic exit delay (2 seconds)
with an audible "chirp" to facilitate
arming of the system after service or
maintenance is completed and the protected
access door is closed. The dimensions of the
1050 controller are only 2.15" x 2".
Additional
Tip Function
A tip function may be added to the impact/abuse
and door protection of this security system by
incorporating a Tip Module as
an accessory.
